This remote switching system is characterized by a multitude of application possibilities. In contrast to other Smarthome switch boxes, you can switch the set via the Internet, at the control panel and by radio remote control. A unique feature is the function of the Smarthome remote control socket outlet without intermediate router, gateway or hub. A DSL connection is also not mandatory. This is made possible by the patented Bluetosec wireless technology, in which the switching signals are sent directly from the control centre to the Smarthome switches, without the need for DSL or external servers.
The range of the radio signals from the control panel to the Smarthome switch is approx. 50 m in the building and can be extended at will by repeaters. This eliminates the otherwise common stress of too short a range with Smarthome sockets.
The Smarthome switch can be used to control any electrical device such as outdoor lights, home lighting, TV sets, sirens, alarm loudspeakers, heating etc.The circuit can be programmed according to your needs in the control panel, you can freely decide when the switch is to be switched on and off, according to a schedule, by triggering sensors, in case of a pre- or main alarm, combinations of the various settings are also possible. The settings are optional according to the "IFTTT" principle (if this happens, it should be activated).
Example:You use an external sensor that monitors your property. A (voice) siren is mounted on the house. You set the Smarthome switch, to which the external siren is connected, to start the siren for 5 seconds when the external sensor is triggered in the time between 7 p.m. and 7 a.m. in order to drive unauthorized persons away from the ground.
In case of a pre-alarm (a burglar tries to open a window) the siren should start for 15 seconds, a second Smarthome switch switches on the light in the house and an alarm loudspeaker with dogs barking continuously.
These escalation levels can be increased at will in order to reliably chase burglars away at an early stage
You can also switch the siren and light on and off at any time via your smartphone or tablet.
Each Smarthome remote switch can be switched directly by 3 different sensors, plus radio signals from the central and via the Internet. Multiple settings (sensors, schedule, event, internet) are possible.
The Smarthome receiver has a fully-fledged Bluetosec repeater. This extends the range of all transmitters and sensors with Bluetosec wireless technology.
3 radio sockets set
The included radio remote control makes it possible to switch electrical devices conveniently from the sofa. You can switch each switch separately or combine 2 or 3 switches to a package. For this purpose, the remote control offers 4 knobs and an intelligent control so that it is possible to switch 1 or 2 or all 3 switches at the same time with one button, just as needed. This control can be changed at any time.
The 3-way radio socket set with 1 x Smarthome remote control socket offers you completely new possibilities to switch any electrical devices via radio, via the Internet and by means of intelligent Smarthome control in the control centre.
Scope of supply:
1 x Wireless Socket Switching capacity each 1000W 230V AC, 4,35A
1 x Smarthome Receiver with 2465 MHz Bluetosec Wireless technology